Get notified about Brushford — tick as many as you like, they all share the notify settings below.
Alert me when (tick one or more)
⤴Unusual rise — FloodRadar+Top 1% rise rate for this gauge.
Height for "Above a height"
Drag the line on the chart, or type a value:mASD
Quick pick:
You'll be notified when this gauge is rising more than 0.10 m/hr — a sign of rapidly increasing water levels.
You'll be notified when a new storm-overflow (sewage) discharge starts within ~3 km of this gauge, based on the water companies' near-real-time feeds.
Get notified when recent rainfall near this gauge crosses its learnt rise trigger — an early "watch"
signal, typically hours before a rise. Experimental; not an official flood warning.
Notify by (tick one or more)
Your browser will ask permission, then you'll get a notification even when FloodRadar isn't open.
On iPhone: tap Share → Add to Home Screen first, then open it from there and set the alert. Show me how
Each one is saved as its own alert — pause or remove them individually any time.
Not an emergency service — if in danger call 999. Alerts rely on
EA/SEPA/NRW data and are best-efforts. Terms
Current Level
0.253 mASD
▬ Steady
24h Max
0.270 mASD
24h Min
0.253 mASD
Typical Range
0.18 - 1.50
mASD
Highest Recorded
3.05 mASD
EA official record
3.05 in our data (since Oct 1967)
Current level is 8% of this
🚽Sewage overflows nearby
Recent Water Levels
🌍 floodradar.co.uk
1 day
EA forecast (official)
Prediction V2
Prediction Eris
Nimbus beta
Experimental model fusing soil moisture, river flow, groundwater and catchment
character. The shaded band is its 10–90% range, widened so that about 80% of recent outcomes fall inside it.
Under evaluation — not yet promoted, so treat as a second opinion.
River Flow
90 days
Daily mean discharge (m³/s) with the daily min–max band, from the EA Hydrology API. Flow is the volume of water passing the gauge — often a more direct flood signal than level.
BRUSHFORD (45165) — flow at this site
7 days
A separate gauge 4.5 m from this one at the same site, shown here for context.
Its readings are its own and are never merged with this page's.
Flow Data: Daily mean flow (m³/s) to 7 Oct (2 days behind — the EA publishes each day's mean a day or two after it ends; unchecked, provisional)via EA Hydrology
Storm overflows whose water reaches this gauge on the mapped river network, nearest first by distance along the river. The status is each water company's monitor: it says whether an overflow is discharging, not how much or what it contains.
3 storm overflows are traced upstream of this gauge, the nearest 1.9 km away along the river. 0 report discharging now, 3 report not discharging.
South West Water · into Trib Of Iron Mill Stream (S) · 4.7 km away in a straight line · its watercourse is not on the river map
11 spills · 33 hours in 2025
Not discharging now · last
3 other overflows within 6 km are downstream of this gauge or on another branch of the river network, so they are not listed.
These are the water companies' monitor statuses; a spill does not by itself explain a change in the gauge level. River connections and distances are traced on OS Open Rivers (edition 2026-04), which leaves out many small channels. Explore the sewage map →
Warnings apply to a whole flood area, not necessarily this exact spot. Years before 2006 aren't covered by the EA's historic record.
See also the Brushford flood history.
Flood areas linked to this gauge
Flood warnings and alerts are issued for whole areas. These are the 4 areas linked to this gauge, nearest first.
🌊 Fairly flashyResponds fairly quickly to rain, with moderate baseflow between events.
Your catchment is all the land that drains rainfall into the river above this gauge. Its character — how
steep, wet, wooded, urban or chalky that land is — decides how fast rain here turns into a rising river. A steep, bare or clay
catchment is “flashy” (rises and falls quickly, floods easily); a flat, chalk or well-wooded one is
slow and steady. The tiles below put numbers to that; the flow-duration curve reads left-to-right
from the river’s typical high flows (Q5) down to its low flows (Q95) — a steep curve means a flashy river.
The physical character of the land that drains to this gauge, and how it shapes its flood response — from the National River Flow Archive (UKCEH).
Baseflow Index
0.45
mixed response
Avg Annual Rainfall
1,791 mm/yr
1991–2020 · +7% since 1941–70
Urban Extent
0.1%
largely rural
Highest Daily Mean Flow
132 m³/s
22 Dec 2012 · daily mean, not the instantaneous peak
Flow-Duration Curve
Daily flow (m³/s) exceeded each % of the time — a steep curve is flashy, a flat one is steady. Q5 high · Q50 median · Q95 low.
Land Cover (2023)
Woodland 7%Grassland 92%Arable 1%Urban 1%
Grassland 85% → 92% since 1990
About this gauge
Velocity area station at road bridge 800m upstream of confluence with River Exe.
More detail
The catchment
Drains high moorland (Exmoor) in west Somerset. Steep, wooded valley sides in lower catchment.
The station
Velocity area station at road bridge 800m upstream of confluence with River Exe.
How it measures flow
Natural bed control at low flows with channel control at medium/high flows. Unstable relationship below ~1m (~25 cumecs). Rating reviewed in 2012 and modelled stage-discharge relationship applied to historic record above this level.
Timing, not cause. Gauges can move together simply because the same rain fell on both.
Frequently asked questions
Is the River Barle at Brushford flooding today?
The current level is 0.25m, which is within the typical range of 0.18 to 1.50m. Flooding is unlikely at this level.
Is the river level rising or falling at Brushford?
Based on the most recent readings, the level is currently steady. The chart above shows the last 12 hours of measurements by default (up to 7 days), updated roughly every 15 minutes.
What is a normal level for the River Barle at Brushford?
The typical range at this station is 0.18m to 1.50m, based on Environment Agency historical data. Levels above 1.50m are higher than usually seen and may indicate a flood risk.
How often is this river level data updated?
Readings are supplied by the Environment Agency gauge. FloodRadar checks for updates roughly every 15 minutes; the timestamp above shows how recent the latest available reading is.
Embed this gauge on your website
Free live river-level widget — ideal for parish councils, angling clubs and local sites. Updates automatically.
Preview
📮 Flood risk by postcode near this gauge
Postcodes within 5 km with properties in the Environment Agency’s rivers-and-sea flood-risk bands:
FloodRadar
Log inCreate free account